Day 34- LHR Wing Protector
Left Hand Rear Wing Protector
This evening we have repeated the method as in day 33, so here are some pics but for the other side.
 |
| Sticking trim to back of protector, which was later removed before riveting. |
 |
| The trim was cut in line with the edge of the protector. |
 |
| Drilling holes through the rubber trim. |
 |
| We had the wing trim over the protector but inside the protector trim. |
 |
| To finish we just cleaned the underside of the wing of dust and bits of fibreglass. |
No comments:
Post a Comment